Ferroelectric Bi4Ti3O12 (BiT) thin films of different thicknesses were deposited on p-type Si substrates using the Chemical Solution Deposition (CSD) method. The films were crystallized by the conventional thermal annealing for 30 min at temperatures in the 500-700 degrees C range. It was found that the shape of the photoconductive signal spectral distribution is dependent on the film thickness. For thin films (150 nm) four peaks were observed (400, 500, 860 and 1075 nm) and the photoconductive signal occurs only if the Si substrate is negatively biased. For thicker films (500 nm) only two peaks were observed (370 and 1075 nm) and the photoconductive signal occurs no matter the polarity of the applied voltage. (C) 1999 Elsevier Science Limited. All rights reserved. [References: 14]

Full text :PDF (145 kB)( for personal use only)